汇编中常见的一些错误信息

发布时间: 更新时间: 总字数:1823 阅读时间:4m 作者: IP属地: 分享 复制网址

汇编中常见的一些错误信息

汇编错误信息

  • FATAL 严重错误
  • cannot open file不能打开文件
  • I/O error closing fileI/O错误 正在关闭文件
  • I/O error writing fileI/O错误 正在写文件
  • I/O error reading file I/O错误 正在读取文件
  • out of memory 缺少内存
  • assembler limit : macro parameter name table full 汇编限制:宏参数名表已满
  • invalid command-line option 无效命令行参数
  • nesting level too deep 嵌套过深
  • unmatched macro nesting 不正确的宏嵌套
  • line too long 行太长
  • unmatched block nesting 不正确的区、段嵌套
  • directive must be in control block 指令必须在控制段
  • error count exceeds 100; stopping assembly 错误数超过100,停止汇编
  • invalid numerical command-line argument 无效命令行参数
  • too many arguments 太多参数、定义、冲突
  • statement too complex 声明太复杂
  • Internal Assembler Error 内部汇编错误
  • missing source filename 找不到源文件名
  • COFF error writing file COFF错误,正在写文件
  • invalid debug and browser data; file exceeds line limit 不能排除故障和浏览数据;文件超过行限制
  • cannot find link.exe 找不到连接程序
  • cannot find cvpack.exe 找不到cvpack.exe
  • SEVERE 严重的错误
  • memory operand not allowed in context 内存操作数无法载入上下文环境
  • immediate operand not allowed 当前操作数无法载入
  • cannot have more than one ELSE clause per IF block IF段只能有一个ELSE从句
  • extra characters after statement 附加的字符在声明之后
  • symbol type conflict 符号类型冲突
  • symbol redefinition 符号已经定义
  • undefined symbol 符号没有定义
  • non-benign record redefinition 没有利于记录的定义
  • syntax error 语法错误
  • syntax error in expression 表达式存在语法错误
  • invalid type expression 无效的类型表达式
  • distance invalid for word size of current segment 当前区、段的大小命令无效
  • PROC, MACRO, or macro repeat directive must precede LOCAL PROC, MACRO, 或 macro repeat指令必须在LOCAL之前
  • .MODEL must precede this directive .MODEL必须在指令之前
  • cannot define as public or external 不能定义为公有或外部的
  • segment attributes cannot change 区、段属性不能更换
  • expression expected 预期表达式
  • operator expected 预期操作数
  • invalid use of external symbol 使用了无效的外部符号
  • operand must be RECORD type or field 操作数必须是RECORD类型或域
  • identifier not a record 没有记录标示符
  • record constants may not span line breaks 连续记录不能超过行间隔
  • instruction operands must be the same size 命令操作数必须是一样的长度
  • instruction operand must have size 命令操作数必须有长度
  • invalid operand size for instruction 操作数长度对于指令无效
  • operands must be in same segment 操作数必须在相同的段
  • constant expected 连续预期
  • operand must be a memory expression 操作数必须是一个内存表达式
  • expression must be a code address 表达式必须是一个代码地址
  • multiple base registers not allowed 不允许多重基础寄存器
  • multiple index registers not allowed 不允许多重标志寄存器
  • must be index or base register 必须是基础或标志寄存器
  • invalid use of register 使用的寄存器无效
  • invalid INVOKE argument 无效的INVOKE符号
  • must be in segment block 必须在区、段、块中
  • DUP too complex DUP太复杂
  • too many initial values for structure 太多结构的基础资料
  • statement not allowed inside structure definition 声明不允许在结构里面
  • missing operand for macro operator 找不到宏的操作数
  • line too long
  • segment register not allowed in context 上下文不允许有寄存器
  • string or text literal too long 文本或字符串太长
  • statement too complex 声明太复杂
  • identifier too long 标识符太长
  • invalid character in file 文件里有无效字符
  • missing angle bracket or brace in literal 语句里找不到同样的括弧或框架
  • missing single or double quotation mark in string 找不到单引号或双引号
  • empty (null) string 没有字符串
  • nondigit in number 没有总数
  • syntax error in floating-point constant 不确定的指向中有语法错误
  • real or BCD number not allowed 不允许real或BCD编码
  • text item required 必须的文本项
  • forced error 强制错误
  • forced error : value equal to 0 标准等于零
  • forced error : value not equal to 0 标准不等于零
  • forced error : symbol not defined 符号没有定义
  • forced error : symbol defined 符号已定义
  • forced error : string blank 字符串是空的
  • forced error : string not blank 字符串不是空的
  • forced error : strings equal 字符串是相同的
  • forced error : strings not equal 字符串不是相同的
  • [ELSE]IF2/.ERR2 not allowed : single-pass assembler [ELSE]IF2/.ERR2不允许单独汇编
  • expression too complex for .UNTILCXZ .UNTILCXZ表达式太复杂
  • can ALIGN only to power of 2 仅能对齐到2的幂
  • structure alignment must be 1, 2, 4, 8, or 16 结构对齐必须是1,2,4,8或16
  • expected 预定义
  • incompatible CPU mode and segment size 不匹配的CPU模式和段尺寸
  • LOCK must be followed by a memory operation LOCK指令必须跟在内存操作之后
  • instruction prefix not allowed 不允许的命令前缀
  • no operands allowed for this instruction 指令没有操作数
  • invalid instruction operands 无效的指令操作数
  • initializer magnitude too large for specified size 初始指定尺寸太大
  • cannot access symbol in given segment or group 在特定的段或类不能存取符号
  • operands have different frames 操作数存在不同的结构
  • cannot access label through segment registers 在段寄存器中不能存取标记
  • jump destination too far 跳转目标太远
  • jump destination must specify a label 跳转目标必须指定一个标记
  • instruction does not allow NEAR indirect addressing 指令不允许近间接寻址
  • instruction does not allow FAR indirect addressing 指令不允许远间接寻址
  • instruction does not allow FAR direct addressing 指令不允许远直接寻址
  • jump distance not possible in current CPU mode 跳转距离不适合当前CPU模式
  • missing operand after unary operator 一元运算符之后找不到操作数
  • cannot mix 16- and 32-bit registers 不能结合16位和32位寄存器
  • invalid scale value 无效范围标准
  • constant value too large 连续标准太多
  • instruction or register not accepted in current CPU mode 当前CPU模式不认可的指令或寄存器
  • reserved word expected 预期的保留字
  • instruction form requires 80386/486 指令需要80386/486指示
  • END directive required at end of file END指令必须在文件结尾
  • too many bits in RECORD 太多位在记录里
  • positive value expected 预期的明确的标准
  • index value past end of string 索引标准在字符串结尾之后
  • count must be positive or zero 计数必须是零或明确的
  • count value too large 计数标准太多
  • operand must be relocatable 操作数必须是转移表
  • constant or relocatable label expected 预期的转移表或连续的
  • segment, group, or segment register expected 预期的段,类型或段寄存器
  • segment expected 预期的区段
  • invalid operand for OFFSET OFFSET操作数无效
  • invalid use of external absolute 由于完全外部的使用无效
  • segment or group not allowed 区段或类型不允许
  • cannot add two relocatable labels 不能增加双重转移表标记
  • cannot add memory expression and code label 不能增加内存表达式和代码标记
Home Archives Categories Tags Statistics
本文总阅读量 次 本站总访问量 次 本站总访客数